Do you want to embroider on a denim jacket and immediately create a garment that feels completely yours? A large embroidery pattern on the back of a denim jacket is perfect for this.
Large cross stitch motif on the back of a denim jacket. Small embroidered patch motifs on the chest pocket. The embroidery looks extra beautiful on denim.
Cross stitch or embroidery pattern Jeans jacket Embroidery thread Sharp embroidery needle Iron-on interfacing Measuring tape Hole template View digital patterns Learn to embroider Download hole template
With a large pattern, the placement is at least as important as the pattern itself. Lay the jacket flat and look closely at the seams, pockets and thick areas of denim. The most beautiful spot is usually the flat center part on the back, where the fabric remains supple enough to wear and where your …
Work calmly from preparation to finishing. Denim can take quite some wear, but a large embroidery remains more beautiful if you first prepare the fabric properly and do not pull it too tight along the way.
It is better to wash the jacket before you start, especially if it is new. Denim may shrink or become stiffer after washing. Let it dry thoroughly and smooth the back so you can work on a flat surface.
Lay the jacket flat and measure the center of the back. Then determine how large your pattern can be. Leave some space around seams, underarms and the bottom edge so that the embroidery does not fall exactly on a moving or thick piece of fabric.
Use the hole punch template to create a grid on the back of the jacket. Work with small, clear marks rather than thick lines. This way you can follow the pattern neatly without being left with visible guide lines later.
Iron a piece of interfacing on the inside of the jacket where you will be embroidering. This gives the denim extra support and helps prevent the fabric from pulling, sagging or tearing when you make many stitches in the same place.
Embroider the pattern stitch by stitch and do not pull your thread too hard. With denim you can quickly see tension as small folds around your stitches. It is better to work a little looser and regularly check the front to see whether the fabric remains nice and flat.
Cut loose threads short and, if necessary, iron a thin piece of interfacing over the back of the embroidery. This feels nicer when wearing and prevents threads from snagging on your clothing.
Choose a large pattern with clear shapes if you want a lot of impact, or combine several smaller motifs if you want to make the jacket more playful. Use a sharp embroidery needle rather than a blunt needle. Denim is more densely woven than embroidery fabric, so your needle really needs to be able to…
Denim is sturdy, but a jacket moves a lot when worn. Therefore, also look at wearing comfort. An embroidery in the middle of the back usually feels better than a thick motif right at the shoulder blades or under your arm. If in doubt, pin the pattern on paper to the jacket and move it around a bit. …
Large cross stitch motif on the back of a denim jacket. Small embroidered patch motifs on the chest pocket. The embroidery looks extra beautiful on denim.
Cross stitch or embroidery pattern Jeans jacket Embroidery thread Sharp embroidery needle Iron-on interfacing Measuring tape Hole template View digital patterns Learn to embroider Download hole template
With a large pattern, the placement is at least as important as the pattern itself. Lay the jacket flat and look closely at the seams, pockets and thick areas of denim. The most beautiful spot is usually the flat center part on the back, where the fabric remains supple enough to wear and where your …
Work calmly from preparation to finishing. Denim can take quite some wear, but a large embroidery remains more beautiful if you first prepare the fabric properly and do not pull it too tight along the way.
It is better to wash the jacket before you start, especially if it is new. Denim may shrink or become stiffer after washing. Let it dry thoroughly and smooth the back so you can work on a flat surface.
Lay the jacket flat and measure the center of the back. Then determine how large your pattern can be. Leave some space around seams, underarms and the bottom edge so that the embroidery does not fall exactly on a moving or thick piece of fabric.
Use the hole punch template to create a grid on the back of the jacket. Work with small, clear marks rather than thick lines. This way you can follow the pattern neatly without being left with visible guide lines later.